Gefen 4K Ultra HD Multi-Format 2x1 HDBaseT Wall-Plate Sender w/ Scaler, Auto-Switching, and POH

Gefen 4K Ultra HD Multi-Format 2x1 HDBaseT Wall-Plate Sender w/ Scaler, Auto-Switching, and POH

$ 1,399.00 1399.0 AUD $ 1,399.00 GST Included

$ 1,271.82 GST Included

Brand
- Gefen
Product Type
- Extenders

This combination does not exist.

Extenders - Copper

Gefen 4K Ultra HD Multi-Format 2x1 HDBaseT Wall-Plate Sender w/ Scaler, Auto-Switching, and POH

$ 1,399.00

SKU:

N/A

Brand: Gefen

Description

The Gefen EXT-UHDV-WP-HBTLS-TX is a high-performance solution in standard US electrical wall-plate form factor for switching 4K Ultra HD HDMI and VGA inputs, and extending them up to 70 meters (230 feet) at 1080p and 40 meters (130 feet) at 4K, over a single CAT-5e cable. Switching between the HDMI and VGA can be set to Automatic or be done manually via the front panel button or RS-232. It supports 10.2 Gbps of data throughput and 300 MHz TMDS Clock frequency, accepting HDMI 2.0 signals up to 4K 60 Hz 4:2:0 or 4K 30 Hz 4:4:4.

This extender uses Gefen’s implementation of the HDBaseT technology with enhancements such as Advanced EDID Management. The HDMI input accommodates resolutions up to 4K Cinema-DCI (4096 x 2160 to 30 Hz 4:4:4) and 4K Ultra HD (3860 x 2160 to 60 Hz, 4:2:0, or 30 Hz 4:4:4), with HDCP 1.4.

Highest performance multichannel digital audio including 7.1 channels of LPCM and HBR (High Bit Rate) digital audio formats, such as Dolby Atmos®, Dolby® TrueHD, DTS:X, and DTS-HD Master Audio are passed through to the HDMI output.

The VGA input features a companion L/R analog audio input, and accepts VESA and CEA resolutions up to WUXGA (1920 x 1200 to 60 Hz, 4:4:4) and 1080p Full HD (1920 x 1080 at 60 Hz, 4:4:4). A powerful built-in scaler can upscale lower resolution

Specifications

Specifications for Gefen 4K Ultra HD Multi-Format 2x1 HDBaseT Wall-Plate Sender w/ Scaler, Auto-Switching, and POH

Brand	Gefen
Product Type	Extenders

Features

Supports 300 MHz TMDS Clock and data throughput of up to 10.2 Gbps
Automatic switching of 4K HDMI and VGA
Manual switching of 4K HDMI and VGA via front panel button or RS-232
VGA scaling up to 1920 x 1200 with picture adjustments
Extend HDMI, VGA with analog audio, and RS-232 over a single CAT-5e:

4K Ultra HD (3840 x 2160 @ 60 Hz, 4:2:0), up to 130 feet/40 meters (8-bit color)
4K Ultra HD (3840 x 2160 @ 30 Hz, 4:4:4), up to 130 feet/40 meters (8-bit color)
4K Cinema (DCI) (4096 x 2160 @ 24 or 30 Hz 4:4:4), up to 130 feet/40 meters (8-bit color)
1080p Full HD (60 Hz) or WUXGA (1920×1200 @ 60 Hz), up to 230 feet/70 meters (up to 12-bit Deep Color)

HDMI Features Supported:

HDMI 2.0
HDCP 1.4
12-bit Deep Color (at 1080p)
LPCM 7.1, Dolby Atmos®, Dolby® TrueHD, DTS:X, and DTS-HD Master Audio pass-through
3DTV pass-through
CEC pass-through
Lip Sync pass-through

Analog L/R audio input for VGA
RS-232 control of switching, scaler, and EDID management functions
Bi-Directional RS-232 extension when used with a compatible Receiver

Power over HDBaseT ((more…)

Tech Specs

Specifications

Specifications*

Recommended Receiver: EXT-UHDA-HBTL-RX

Maximum TMDS Clock: 300 MHz

Total Signal Bandwidth/Data Rate: 10.2 Gbps

Video Input Connector: (1) HDMI Type A 19-pin, female, locking
:
(1) VGA HD-15, female

L/R Analog Audio Input port: (1) 3.5mm mini-stereo jack

Link Connector: (1) RJ-45, shielded

RS-232 port: (1) 4-pin Phoenix

DC In port: (1) 2-pin Phoenix

Firmware Update port: (1) USB-Mini-B, female

Power Indicator LED: (1) Blue

Link Indicator LED: (1) Green

HDCP Indicator LED: (1) Green

HDMI Input Indicator LED: (1) Green

VGA Input Indicator LED: (1) Green

Auto-Manual Switch: (1) tact-type

Power Requirement: Powered through POH from a compatible Receiver (recommended), or via the Phoenix connector on back panel, using a hard-wired 12V 1~2A DC power supply

Recommended Power Supply (sold separately): EXT-PS121.5AIP-3P-6 (DC plug needs to be removed)

Power Consumption: 6W maximum

Operating Temperature: +32 to +122 °F (0 to +50 °C)

Operating Humidity: 5% to 90% RH, non-condensing

Storage Temperature: -4 to +185 °F (-20 to +85 °C)

Storage Humidity: 0% to 95% RH, non-condensing

MTBF: 50000 hours

Overall Dimensions ((more…)

Other Specifications

Shipping Info

Length7.4 (Inches)
Width5.4 (Inches)
Height4 (Inches)
Weight0.8 (Lbs)
Unit of MeasureEach
UPC888814999891

Other Specifications

Specifications*
Recommended Receiver EXT-UHDA-HBTL-RX
Maximum TMDS Clock 300 MHz
Total Signal Bandwidth/Data Rate 10.2 Gbps
Video Input Connector(1) HDMI Type A 19-pin, female, locking
(1)VGA HD-15, female
L/R Analog Audio Input port (1) 3.5mm mini-stereo jack
Link Connector (1) RJ-45, shielded
RS-232 port (1) 4-pin Phoenix
DC In port (1) 2-pin Phoenix
Firmware Update port (1) USB-Mini-B, female
Power Indicator LED (1) Blue
Link Indicator LED (1) Green
HDCP Indicator LED (1) Green
HDMI Input Indicator LED (1) Green
VGA Input Indicator LED (1) Green
Auto-Manual Switch (1) tact-type
Power Requirement Powered through POH from a compatible Receiver (recommended), or via the Phoenix connector on back panel, using a hard-wired 12V 1~2A DC power supply
Recommended Power Supply (sold separately) EXT-PS121.5AIP-3P-6 (DC plug needs to be removed)
Power Consumption 6W maximum
Operating Temperature +32 to +122 °F (0 to +50 °C)
Operating Humidity 5% to 90% RH, non-condensing
Storage Temperature -4 to +185 °F (-20 to +85 °C)
Storage Humidity 0% to 95% RH, non-condensing
MTBF 50000 hours
Overall Dimensions (W x H x D, not including the connectors) 3.5″ x 4.2″ x 1.74″ (89mm x 104.5mm x 44mm)
Mounting Cavity Dimensions (W x H x D, behind the mounting plate) 3.6″ x 2.8″ x 2″ (92mm x 72mm x 50mm)
Net Weight 0.6 lbs (0.27 kg)
Shipping Weight 0.9 lbs (0.4 kg)
* Features and specifications are subject to change without notice.