Gefen 4K Ultra HD 600 MHz HDBaseT Extender w/ HDR, 2-way IR, and POL
The Gefen GTB-UHD600-HBTL is a compact and high-performance solution for extending full-bandwidth HDMI 2.0 audio/video with HDR up to 40 meters (132 feet), over a CAT-5e or better cable. It supports 18.2 Gbps of data throughput and 600 MHz TMDS Clock frequency, the highest specified under the HDMI 2.0 standard. This extender uses HDBaseT technology along with Gefen’s visually lossless proprietary compression algorithms with very high PSNR (Peak Signal to Noise Ratio), to accommodate resolutions up to 4K Cinema-DCI (4096 x 2160 to 60 Hz 4:4:4) and 4K Ultra HD (3860 x 2160 to 60 Hz, 4:4:4) with HDR. High Dynamic Range (HDR) delivers greater contrast between light and dark areas of a video image, resulting in tremendous improvement in picture quality and color depth. HDCP 2.2 and the legacy HDCP 1.4 are both supported. The GTB-UHD600-HBTL also supports 1080p Full HD, WUXGA (1920 x 1200), 3DTV, and Deep Color (up to 1080p resolution). Highest performance multichannel digital audio including 7.1 channels of LPCM and HBR (High Bit Rate) digital audio formats, such as Dolby Atmos®, Dolby® TrueHD, DTS:X, and DTS-HD Master Audio are passed through to the HDMI outputs. The GTB-UHD600-HBTL provides 2-way IR extension between the Sender and the Receiver units
Native Panopto integration
Stream, record, and upload video from the camera directly to Panopto. No PC or additional hardware required.
One cable delivers everything
A single Ethernet cable handles power, network, video, and audio. The camera is ready for Panopto recording right out of the box.
Capture rooms that were out of reach
Add recording to spaces that never had it, or bring presenter video into slide-only setups.
Fleet-first camera management
EC20 paired with Epiphan Edge rethinks how cameras are deployed and operated at scale. It’s the first
PTZ camera designed to run as part of a cloud-managed fleet, delivering instant, fleet-wide visibility
with cloud management built in by design.
Visibility first. Always on.
Monitor status, access camera controls, and update firmware across your entire deployment from a single dashboard.
Faster fixes, less downtime
Resolve issues remotely with secure access to camera controls. Enjoy full management capability without on-site intervention.
Deploy faster. Scale cleanly.
Go from box to capture-ready in minutes, reducing site visits and scaling deployments without added headcount.