NETIO PowerPDU 8QS: LAN PDU, 8 outputs (8x IEC-320 C13) (2 channels metered)
NETIO PowerPDU 8QS is a PDU (Power Distribution Unit) with eight power outputs (8x IEC-320 C13) controlled and metered over a LAN. It fits into a 19” cabinet (1U). Each output can be switched on/off individually. PowerPDU 8QS supports two channels for electrical measurements: the PDU as a whole (all outputs combined), and the first output separately (All Outputs + 1). A digital input (DI) can be used to control the outputs or count S0 pulses (electricity meter output).
NETIO PowerPDU 8QS can be configured with a web browser (allows output control, connection to NETIO Cloud, Open API communication settings, etc.).
Thanks to the Open API, integration with third-party systems using various protocols (JSON, Modbus/TCP, SNMP, MQTT-flex, Telnet, ...) is easy. Ready-made AV drivers make it simple to connect the NETIO PDU to professional Audio/Video systems such as Neets, Crestron, Control4, RTI, Savant and more.
With the NETIO Cloud service, the outputs can be controlled from anywhere. The NETIO Cloud service, provided for a fee, uses SSL security and servers in Europe.
The NETIO Mobile2 app controls each output individually over LAN (local network).
To switch the outputs on in a sequence, a power-up delay can be configured for each output.
NETIO PowerPDU 8QS is a PDU (Power Distribution Unit) with eight power outputs (8x IEC-320 C13) controlled and metered over a LAN. It fits into a 19” cabinet (1U). Each output can be switched on/off individually. PowerPDU 8QS supports two channels for electrical measurements: the PDU as a whole (all outputs combined), and the first output separately (All Outputs + 1). A digital input (DI) can be used to control the outputs or count S0 pulses (electricity meter output).
NETIO PowerPDU 8QS can be configured with a web browser (allows output control, connection to NETIO Cloud, Open API communication settings, etc.).
Thanks to the Open API, integration with third-party systems using various protocols (JSON, Modbus/TCP, SNMP, MQTT-flex, Telnet, ...) is easy. Ready-made AV drivers make it simple to connect the NETIO PDU to professional Audio/Video systems such as Neets, Crestron, Control4, RTI, Savant and more.
With the NETIO Cloud service, the outputs can be controlled from anywhere. The NETIO Cloud service, provided for a fee, uses SSL security and servers in Europe.
The NETIO Mobile2 app controls each output individually over LAN (local network).
To switch the outputs on in a sequence, a power-up delay can be configured for each output.
Native Panopto integration
Stream, record, and upload video from the camera directly to Panopto. No PC or additional hardware required.
One cable delivers everything
A single Ethernet cable handles power, network, video, and audio. The camera is ready for Panopto recording right out of the box.
Capture rooms that were out of reach
Add recording to spaces that never had it, or bring presenter video into slide-only setups.
Fleet-first camera management
EC20 paired with Epiphan Edge rethinks how cameras are deployed and operated at scale. It’s the first
PTZ camera designed to run as part of a cloud-managed fleet, delivering instant, fleet-wide visibility
with cloud management built in by design.
Visibility first. Always on.
Monitor status, access camera controls, and update firmware across your entire deployment from a single dashboard.
Faster fixes, less downtime
Resolve issues remotely with secure access to camera controls. Enjoy full management capability without on-site intervention.
Deploy faster. Scale cleanly.
Go from box to capture-ready in minutes, reducing site visits and scaling deployments without added headcount.